{"title":"JL Audio","description":null,"products":[{"product_id":"jl-audio-c7-100ct-c7-series-1-25mm-aluminium-dome-component-tweeter-100w-rms","title":"JL Audio C7-100CT C7 Series 1\" 25mm Aluminium Dome Component Tweeter 100w RMS","description":"\u003cp\u003e\u003cstrong\u003eC7-100ct\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e1-inch (25 mm) Component Tweeter, Single\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eC7-100ct\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1-inch (25 mm) Corundum Ceramic-Coated, Aluminum Dome Component Tweeter\u003c\/p\u003e\n\u003cp\u003eC7 is the pinnacle of JL Audio automotive loudspeaker design, benefiting from our most advanced development tools and a complete commitment to precision manufacturing.\u003c\/p\u003e\n\u003cp\u003eThe C7-100ct component tweeter is designed to deliver unparalleled high-frequency performance. Utilizing a corundum ceramic-coated aluminum alloy diaphragm suspended via a treated silk, s-roll surround, it provides spectacularly detailed reproduction of treble frequencies with outstanding off-axis response. Distortion and non-linearities have been minimized through critical optimization of dynamic motor and suspension behaviors.\u003c\/p\u003e\n\u003cp\u003ePassive crossover networks are not included with C7 drivers, as they are designed for active systems. Instead, we recommend a high-quality tuning DSP, such as the JL Audio TwK™ 88 or D8, and a dedicated amplifier channel for each C7 loudspeaker in the system. Precise setup of equalization, delay and crossover filters will ensure optimal in-vehicle performance.\u003c\/p\u003e\n\u003cp\u003eC7-100ct Design Notes:\u003c\/p\u003e\n\u003cp\u003eDome Diaphragm: Corundum ceramic coated aluminum alloy diaphragm exhibits high stiffness, very low mass and excellent environmental stability. It also helps the tweeter dome to hold its shape and operate as a true piston at higher frequencies, without a penalty in moving mass.\u003c\/p\u003e\n\u003cp\u003eSuspension Design: The diaphragm's motion is centered, sprung and damped by a treated silk, s-roll surround. Ferrofluid in the magnetic gap acts as a rear suspension element in this design. The two combine to provide optimum damping without unduly restricting excursion.\u003c\/p\u003e\n\u003cp\u003eMotor Design: The C7-100ct employs a high-density magnetic circuit with a neodymium magnet and U-Yoke motor topology. An under-hung voice coil is employed, wound with copper-clad aluminum wire onto an aluminum voice coil former. Motor magnetics have been precisely optimized utilizing advanced FEA tools to lower even order distortion and IMD\/AMD.\u003c\/p\u003e\n\u003cp\u003eAcoustical Design: The shape of the tweeter housing is designed to boost sensitivity in a very specific bandwidth, helping to flatten the frequency response. It also provides improved control of directivity.\u003c\/p\u003e\n\u003cp\u003eDesign Bandwidth:\u003c\/p\u003e\n\u003cp\u003eWith 48 dB\/octave filters: 3,000 Hz - 30,000 Hz\u003c\/p\u003e\n\u003cp\u003eWith 24 dB\/octave filters: 4,000 Hz - 30,000 Hz\u003c\/p\u003e\n\u003cp\u003eWith 12 dB\/octave filters: 5,000 Hz - 30,000 Hz\u003c\/p\u003e\n\u003cp\u003eSold individually, with flush and surface mounting fixtures and hardware. One 15μF tweeter protection capacitor is also included.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791937306714,"sku":"90978","price":239.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-speakers-jl-audio-c7-100ct-c7-series-1-25mm-aluminium-dome-component-tweeter-100w-rms-47166198546698.jpg?v=1786096263"},{"product_id":"jl-audio-c7-350cm-c7-series-3-5-9cm-car-component-midrange-speaker-100w-rms","title":"JL Audio C7-350cm C7 Series 3.5\" 9cm Car Component Midrange Speaker 100w RMS","description":"\u003cp\u003e\u003cstrong\u003eC7-350cm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e3.5-inch (90 mm) Component Midrange, Single\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eC7-350cm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e3.5-inch (90 mm) Component Midrange, with Grille\u003c\/p\u003e\n\u003cp\u003eC7 is the pinnacle of JL Audio automotive loudspeaker design, benefiting from our most advanced development tools and a complete commitment to precision manufacturing.\u003c\/p\u003e\n\u003cp\u003eThe C7-350cm component midrange is designed to operate in a 3-way system, with a woofer and tweeter. Conceived and purpose-built from the ground up, it offers exceptional transient response and outstanding linearity, resulting in unsurpassed clarity and natural mid-range reproduction. Distortion and non-linearities have been minimized through critical optimization of dynamic motor and suspension behaviors.\u003c\/p\u003e\n\u003cp\u003ePassive crossover networks are not included with C7 drivers, as they are designed for active systems. Instead, we recommend a high-quality tuning DSP, such as the JL Audio TwK™ 88 or D8, and a dedicated amplifier channel for each C7 loudspeaker in the system. Precise setup of equalization, delay and crossover filters will ensure optimal in-vehicle performance.\u003c\/p\u003e\n\u003cp\u003eC7-350cm Design Notes:\u003c\/p\u003e\n\u003cp\u003eCone and Dust Cap: Vacuum-formed, mineral-filled polypropylene material offers excellent damping and low mass. The cone body features a gentle curvilinear profile to optimize response. A concave dust cap further improves high frequency behavior.\u003c\/p\u003e\n\u003cp\u003eSuspension design: The moving assembly is suspended and damped via a linear profile spider formed from a Nomex®\/polycotton blend, and a positive-roll, rubber surround. The two combine to provide optimum damping without prematurely restricting excursion.\u003c\/p\u003e\n\u003cp\u003eMotor Design: The C7-350cm employs a high-density magnetic circuit with a high-grade, neodymium magnet, and a specially machined, U-Yoke motor topology. Motor magnetics have been precisely optimized utilizing advanced FEA tools to reduce distortion and provide linear motor force throughout the driver's performance range.\u003c\/p\u003e\n\u003cp\u003eA 36 mm (1.42 inch) diameter, overhung voice coil is employed, wound with copper-clad aluminum wire onto a fiberglass voice coil former. The oversized voice coil offers extended power handling capability, minimizing thermal compression and distortion at higher listening levels.\u003c\/p\u003e\n\u003cp\u003eChassis Design: A purpose-engineered cast alloy basket is employed, featuring thin spokes to maximize rear open area.\u003c\/p\u003e\n\u003cp\u003eDesign Bandwidth:\u003c\/p\u003e\n\u003cp\u003eWith 48 dB\/octave filters: 300 Hz - 10 kHz\u003c\/p\u003e\n\u003cp\u003eWith 24 dB\/octave filters: 400 Hz - 10 kHz\u003c\/p\u003e\n\u003cp\u003eWith 12 dB\/octave filters: 500 Hz - 10 kHz\u003c\/p\u003e\n\u003cp\u003eBuilt in USA with Global Components\u003c\/p\u003e\n\u003cp\u003eSold individually, with a cast-alloy grille tray, one fine mesh steel grille insert and one spiral steel grille insert.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791937339482,"sku":"90979","price":409.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-speakers-jl-audio-c7-350cm-c7-series-3-5-9cm-car-component-midrange-speaker-100w-rms-47166200086794.jpg?v=1786096251"},{"product_id":"jl-audio-c7-650cw-c7-series-6-5-16-5cm-car-mid-bass-woofer-speaker-125w-rms","title":"JL Audio C7-650cw C7 Series 6.5\" 16.5cm Car Mid Bass Woofer Speaker 125w RMS","description":"\u003cp\u003e\u003cstrong\u003eC7-650cw\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e6.5-inch (165 mm) Component Woofer, Single\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eC7-650cw\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e6.5-inch (165 mm) Component Woofer, with Grille\u003c\/p\u003e\n\u003cp\u003eC7 is the pinnacle of JL Audio automotive loudspeaker design, benefiting from our most advanced development tools and a complete commitment to precision manufacturing.\u003c\/p\u003e\n\u003cp\u003eThe C7-650cw component woofer is capable of operating in a 3-way system, with a midrange and tweeter, or with only a tweeter in a 2-way configuration. Engineered from the ground up, it has exceptional linear excursion capability and outstanding linearity, resulting in solid mid-bass and pure, precise, mid-range performance. Distortion and non-linearities have been minimized through critical optimization of dynamic motor and suspension behaviors.\u003c\/p\u003e\n\u003cp\u003ePassive crossover networks are not included with C7 drivers, as they are designed for active systems. Instead, we recommend a high-quality tuning DSP, such as the JL Audio TwK™ 88 or D8, and a dedicated amplifier channel for each C7 loudspeaker in the system. Precise setup of equalization, delay and crossover filters will ensure optimal in-vehicle performance.\u003c\/p\u003e\n\u003cp\u003eC7-650cw Design Notes:\u003c\/p\u003e\n\u003cp\u003eCone and Dust Cap: Vacuum-formed, mineral-filled polypropylene material offers excellent damping and low mass. The cone body features a gentle curvilinear profile to optimize response. A specially shaped dust cap attaches to the cone body and the voice coil former to improve high frequency behavior.\u003c\/p\u003e\n\u003cp\u003eSuspension design: The moving assembly is suspended and damped via a large-diameter, linear profile spider formed from a Nomex®\/polycotton blend, and a positive-roll, rubber surround. The two combine to provide optimum damping without prematurely restricting the C7-650cw's outstanding excursion capability.\u003c\/p\u003e\n\u003cp\u003eMotor Design: The C7-650cw employs a high-density magnetic circuit with a high-grade Y35 Strontium-ferrite magnet, and a specially machined, T-Yoke motor topology. Motor magnetics have been precisely optimized utilizing advanced FEA tools to reduce distortion and provide linear motor force throughout the driver's performance range.\u003c\/p\u003e\n\u003cp\u003eA 32 mm (1.27 inch) diameter, overhung voice coil is employed, wound with copper wire onto a fiberglass voice coil former. The oversized voice coil offers extended power handling capability, minimizing thermal compression and distortion at higher listening levels. Chassis Design: A purpose-engineered cast alloy basket is employed, featuring thin spokes to maximize rear open area, and our Patented Elevated Frame Cooling technology.\u003c\/p\u003e\n\u003cp\u003eDesign Bandwidth:\u003c\/p\u003e\n\u003cp\u003eWith 48 dB\/octave filters: 50 Hz - 5 kHz\u003c\/p\u003e\n\u003cp\u003eWith 24 dB\/octave filters: 60 Hz - 5 kHz\u003c\/p\u003e\n\u003cp\u003eWith 12 dB\/octave filters: 70 Hz - 5 kHz\u003c\/p\u003e\n\u003cp\u003eBuilt in USA with Global Components\u003c\/p\u003e\n\u003cp\u003eSold individually, with a cast-alloy grille tray, one fine mesh steel grille insert and one spiral steel grille insert.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791937372250,"sku":"90980","price":519.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-speakers-jl-audio-c7-650cw-c7-series-6-5-16-5cm-car-mid-bass-woofer-speaker-125w-rms-47166201299210.jpg?v=1786096235"},{"product_id":"jl-audio-c1-650x-c1-series-6-5-16-5cm-coaxial-car-door-speakers-50w-rms-pair","title":"JL Audio C1-650x C1 Series 6.5\" 16.5cm Coaxial Car Door Speakers 50w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eJL Audio C1-650x\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eC1 Series 6-1\/2\" 2-way car speakers\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNEW VERSION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e IMPROVED TWEETER GRILL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoaxial Speaker System: 6.5-inch (165 mm) Woofer, 0.75-inch (19 mm) Aluminum Dome Tweeter\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eC1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.\u003c\/p\u003e\n\u003cp\u003eTo facilitate fit, multi-application adaptor rings are included with the C1-650x allowing easy, drop-in installation in vehicles equipped with oversized 6.5-inch and 6.75-inch speaker openings. Without the ring, the speaker will fit into many \"6-inch\" speaker locations as well.\u003c\/p\u003e\n\u003cp\u003eC1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-650x is a proprietary, stamped, steel 6.50-inch (165 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control the voice coil's motion. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.\u003c\/p\u003e\n\u003cp\u003eEquipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling.\u003c\/p\u003e\n\u003cp\u003eWhen it comes to value, C1 is the real deal!\u003c\/p\u003e\n\u003cp\u003eSold as a pair. Grilles not available.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791939862618,"sku":"90959","price":79.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-speakers-jl-audio-c1-650x-c1-series-6-5-16-5cm-coaxial-car-door-speakers-50w-rms-pair-47166303764746.jpg?v=1786095679"},{"product_id":"jl-audio-c1-525x-c1-series-5-25-13cm-coaxial-car-door-speakers-50w-rms-pair","title":"JL Audio C1-525x C1 Series 5.25\" 13cm Coaxial Car Door Speakers 50w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eJL Audio C1-525x\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eC1 Series 5-1\/4\" 2-way car speakers\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNEW VERSION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eIMPROVED TWEETER GRILL\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoaxial Speaker System: 5.25-inch (130 mm) Woofer, 0.75-inch (19 mm) Aluminum Dome Tweeter\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eC1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.\u003c\/p\u003e\n\u003cp\u003eC1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-525x is a proprietary, stamped, steel 5.25-inch (130 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.\u003c\/p\u003e\n\u003cp\u003eEquipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling.\u003c\/p\u003e\n\u003cp\u003eWhen it comes to value, C1 is the real deal!\u003c\/p\u003e\n\u003cp\u003eSold as a pair. Grilles not available.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791939960922,"sku":"90955","price":69.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-speakers-jl-audio-c1-525x-c1-series-5-25-13cm-coaxial-car-door-speakers-50w-rms-pair-47166304977162.jpg?v=1786095655"},{"product_id":"jl-audio-c1-075ct-0-75-19mm-car-component-tweeters-crossovers-50w-rms-pair","title":"JL Audio C1-075CT 0.75\" 19mm Car Component Tweeters \u0026 Crossovers 50w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eJL Audio C1-075ct\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eC1 Series 3\/4\" aluminum dome tweeters\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0.75-inch (19 mm) Aluminum Dome Tweeters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eC1 component tweeters are engineered to deliver refined performance, with excellent off-axis response and high-frequency extension. Utilizing true, edge driven 0.75-inch aluminum domes with silk suspensions, the C1-075ct component tweeters provide smooth, detailed reproduction of treble frequencies from 4 – 24 kHz.\u003c\/p\u003e\n\u003cp\u003eThe tweeters can be flush-mounted or surface-mounted with the supplied fixtures to fit a wide variety of installation needs. Inline, outboard, 12 dB \/ octave, high-pass filters are included to ensure smooth response and reliability. These fliters also are equipped with Advanced Tweeter Protection Circuitry to improve power handling and reliability.\u003c\/p\u003e\n\u003cp\u003eWhen it comes to value, C1 is the real deal!\u003c\/p\u003e\n\u003cp\u003eSold as a pair.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791940026458,"sku":"90952","price":49.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-speakers-jl-audio-c1-075ct-0-75-19mm-car-component-tweeters-crossovers-50w-rms-pair-47166307795210.jpg?v=1786095634"},{"product_id":"jl-audio-c1-570x-c1-series-5x7-6x8-coaxial-car-door-speakers-50w-rms-pair-1","title":"JL Audio C1-570x C1 Series 5x7\" 6x8\" Coaxial Car Door Speakers 50w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eJL Audio C1-570x\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eC1 Series 5\"x7\" 2-way car speakers\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoaxial Speaker System: 5 x 7 \/ 6 x 8-inch (125 x 180 mm) Woofer, 0.75-inch (19 mm) Aluminum Dome Tweeter\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eC1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.\u003c\/p\u003e\n\u003cp\u003eTo facilitate fit, spacer\/adaptor rings are included, allowing the C1-570x to be installed in bottom-mount applications. The speaker baskets are also equipped with slotted mounting holes to fit into 6 x 8-inch factory speaker locations.\u003c\/p\u003e\n\u003cp\u003eC1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-570x is a proprietary, stamped, steel 5 x 7-inch (125 x 180 mm) oval frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.\u003c\/p\u003e\n\u003cp\u003eEquipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling.\u003c\/p\u003e\n\u003cp\u003eWhen it comes to value, C1 is the real deal!\u003c\/p\u003e\n\u003cp\u003eSold as a pair. Grilles not included.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791940091994,"sku":"90956","price":84.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-speakers-jl-audio-c1-570x-c1-series-5x7-6x8-coaxial-car-door-speakers-50w-rms-pair-47166308745482.jpg?v=1786095608"},{"product_id":"jl-audio-c3-650-c3-series-6-5-17cm-coaxial-component-car-speakers-75w-rms-pair","title":"JL Audio C3-650 C3 Series 6.5\" 17cm Coaxial Component Car Speakers 75w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eJL Audio C3-650\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eEvolution™ C3 Series 6-1\/2\" convertible component speaker system\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2-Way Convertible Component \/ Coaxial System: 6.5-inch (165 mm) Woofer, 1-inch (25 mm) Silk Dome Tweeter\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eC3 Product Spotlight\u003c\/p\u003e\n\u003cp\u003eThere are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application.\u003c\/p\u003e\n\u003cp\u003eThe C3-650 system features 6.5-inch (165 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-molded polymer baskets. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.\u003c\/p\u003e\n\u003cp\u003eThe C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures.\u003c\/p\u003e\n\u003cp\u003eC3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations!\u003c\/p\u003e\n\u003cp\u003eWoofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo.\u003c\/p\u003e\n\u003cp\u003eSonic character: Clean and Powerful\u003c\/p\u003e\n\u003cp\u003eSold as a pair.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791940223066,"sku":"90976","price":469.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-speakers-jl-audio-c3-650-c3-series-6-5-17cm-coaxial-component-car-speakers-75w-rms-pair-47166310154506.jpg?v=1786095585"},{"product_id":"jl-audio-c2-075ct-c2-series-19mm-car-component-tweeters-crossovers-60w-rms-pair","title":"JL Audio C2-075CT C2 Series 19mm Car Component Tweeters Crossovers 60w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eC2-075ct\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e0.75-inch (19 mm) Component Tweeters, Pair\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eC2-075ct 0.75-inch (19 mm) Silk Dome Tweeters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe silk dome tweeter is prized by audiophiles for delivering realistic, non-fatiguing, high-frequency performance.\u003c\/p\u003e\n\u003cp\u003eThe C2 component tweeters are built with 0.75-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs.\u003c\/p\u003e\n\u003cp\u003eInline 12 dB \/ octave high-pass filters with tweeter protectors are included with this kit. The C2-075ct is designed to operate above 4 kHz with a minimum high-pass slope of 12 dB \/ octave.\u003c\/p\u003e\n\u003cp\u003eSonic character: Clean and Powerful\u003c\/p\u003e\n\u003cp\u003eSold as a pair.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791940288602,"sku":"90962","price":92.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-speakers-jl-audio-c2-075ct-c2-series-19mm-car-component-tweeters-crossovers-60w-rms-pair-47166314447114.jpg?v=1786095561"},{"product_id":"jl-audio-c2-350x-c2-series-3-5-9cm-coaxial-car-door-dash-speakers-25w-rms-pair","title":"JL Audio C2-350x C2 Series 3.5\" 9cm Coaxial Car Door Dash Speakers 25w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eC2-350x\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e3.5-inch (90 mm) Coaxial Speaker System\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eC2-350x\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCoaxial Speaker System: 3.5-inch (90 mm) Woofer, 0.75-inch (19 mm) Silk Dome Tweeter\u003c\/p\u003e\n\u003cp\u003eThe Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs.\u003c\/p\u003e\n\u003cp\u003eThe C2-350x system features 3.5-inch (90 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.\u003c\/p\u003e\n\u003cp\u003eTweeters are coaxially mounted and built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles.\u003c\/p\u003e\n\u003cp\u003eSpeaker grilles are not available for this speaker system.\u003c\/p\u003e\n\u003cp\u003eSonic character: Clean and Dynamic\u003c\/p\u003e\n\u003cp\u003eSold as a pair.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791940354138,"sku":"90963","price":92.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-speakers-jl-audio-c2-350x-c2-series-3-5-9cm-coaxial-car-door-dash-speakers-25w-rms-pair-47166315266314.jpg?v=1786095547"},{"product_id":"jl-audio-c2-400x-c2-series-4-10cm-coaxial-car-door-dash-speakers-35w-rms-pair-1","title":"JL Audio C2-400x C2 Series 4\" 10cm Coaxial Car Door Dash Speakers 35w RMS","description":"\u003cp\u003e\u003cstrong\u003eJL Audio C2-400X\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eEvolution™ C2 Series 4\" 2-way car speakers\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoaxial Speaker System: 4-inch (100 mm) Woofer, 0.75-inch (19 mm) Silk Dome Tweeter\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs.\u003c\/p\u003e\n\u003cp\u003eThe C2-400x system features 4-inch (100 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.\u003c\/p\u003e\n\u003cp\u003eBreakaway mounting tabs on the woofer frame allow the C2-400x to be installed in four-hole or two-hole configurations. Injection-Molded adaptor plates are also included to allow mounting of the C2-400x speakers into a 4 x 6 (100 x 150 mm) speaker location.\u003c\/p\u003e\n\u003cp\u003eTweeters are coaxially mounted and built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles.\u003c\/p\u003e\n\u003cp\u003eSpeaker grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo.\u003c\/p\u003e\n\u003cp\u003eSonic character: Clean and Dynamic\u003c\/p\u003e\n\u003cp\u003eSold as a pair.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791940419674,"sku":"90964","price":129.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-speakers-jl-audio-c2-400x-c2-series-4-10cm-coaxial-car-door-dash-speakers-35w-rms-pair-47166316577034.jpg?v=1786095533"},{"product_id":"jl-audio-jd250-1-jd-series-monoblock-amp-class-d-subwoofer-amplifier-250w-rms","title":"JL Audio JD250\/1 JD Series Monoblock Amp Class D Subwoofer Amplifier 250w RMS","description":"\u003cp\u003e\u003cstrong\u003eJL Audio JD250\/1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eJD Series mono subwoofer amplifier, 250 W x 1 @ 2 Ω \/ 150 W x 1 @ 4 Ω - 14.4V\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonoblock Class D Subwoofer Amplifier, 250 W x 1 @ 2 Ω \/ 150 W x 1 @ 4 Ω - 14.4V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned to produce a healthy 250 watts into 2 ohms (14.4V, 1% THD), the JD250\/1 amplifier is a great solution for powering subwoofers in a cost-conscious system. Our proprietary NexD™ switching technology delivers large amounts of real-world power output with excellent efficiency and ultra-low distortion.\u003c\/p\u003e\n\u003cp\u003eThe JD250\/1’s controls are located on the input panel. while the power and speaker connections can be found along the opposite end of its extruded aluminum chassis. Signal processing features include a 12 dB \/ octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balanced inputs are also on-hand, capable of accepting line-level and speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.\u003c\/p\u003e\n\u003cp\u003eThe JD250\/1 is also equipped with an onboard LED-clipping indicator ring, surrounding the input sensitivity control. This useful feature lets you easily set your amplifier’s input sensitivity, quickly and accurately, without special equipment. With the addition of an RBC-1 remote level control (sold separately), you can control the subwoofer level from the driver’s seat.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791940485210,"sku":"91014","price":209.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-amplifier-jl-audio-jd250-1-jd-series-monoblock-amp-class-d-subwoofer-amplifier-250w-rms-47166317232394.jpg?v=1786095514"},{"product_id":"jl-audio-xd200-2-v2-xd-series-2-channel-class-d-car-amp-amplifier-200w-rms","title":"JL Audio XD200\/2 v2 XD Series 2 Channel Class D Car Amp Amplifier 200w RMS","description":"\u003cp\u003e\u003cstrong\u003eXD200\/2v2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2 Ch. Class D Full-Range Amplifier, 200 W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXD200\/2v2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2-Channel Class D Full-Range Amplifier, 100 W x 2 @ 2 Ω \/ 75 W x 2 @ 4 Ω - 14.4V\u003c\/p\u003e\n\u003cp\u003eXDv2 Spec ICON\u003c\/p\u003e\n\u003cp\u003eXD200\/2 Product Spotlight\u003c\/p\u003e\n\u003cp\u003eThis tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts per channel into 2 ohms (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD™ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.\u003c\/p\u003e\n\u003cp\u003eThe XD200\/2v2 includes a 12 dB \/ octave filter which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz.\u003c\/p\u003e\n\u003cp\u003eThe XD200\/2v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier's level can be directly controlled from the driver's seat.\u003c\/p\u003e\n\u003cp\u003eThis amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.\u003c\/p\u003e\n\u003cp\u003eDownload the XDv2: Full-Range Amplifiers Catalog Sheet\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791940517978,"sku":"91047","price":299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-amplifier-jl-audio-xd200-2-v2-xd-series-2-channel-class-d-car-amp-amplifier-200w-rms-47166331748618.jpg?v=1786095479"},{"product_id":"jl-audio-vx800-8i-vxi-series-8-channel-full-range-amplifier-dsp-amp-800w-rms","title":"JL Audio VX800\/8i VXi Series 8 Channel Full Range Amplifier DSP Amp 800w RMS","description":"\u003cp\u003e\u003cstrong\u003eJL Audio VX800\/8i\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e8 Ch. Class D Full-Range Amplifier with Integrated DSP, 800 W\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVX800\/8i\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8-Channel Class D Full-Range Amplifier with Integrated DSP, 100 W x 8 @ 2 Ω \/ 75 W x 8 @ 4 Ω - 14.4V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned to simplify great audio, every VXi amplifier combines our advanced NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor.\u003c\/p\u003e\n\u003cp\u003eWith our second-generation NexD2™ technology, the VX800\/8i full-range amplifier outputs up to 75 watts per channel into 4 ohms, or 100 watts into 2 ohms. It can also be bridged into 4 ohms to deliver a powerful 200 W x 4.\u003c\/p\u003e\n\u003cp\u003eThe NexD2™ full-range technology in this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. The amplifier chassis is ultra-compact, with all connections on one side, to greatly simplify installation into tight spaces.\u003c\/p\u003e\n\u003cp\u003eInstead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN™ Software application installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTüN™ Software Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIntuitive setup and tuning, all at your fingertips. Automatically recognizes connected amplifier and displays appropriate interface. TüN™ is available for download for free in a variety of applications, for computers and most handheld devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnprecedented, Onboard DSP Tuning Power\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePremium, triple-core AKM® DSP with an optimized configuration, developed in collaboration with AKM®\u003c\/li\u003e\n\u003cli\u003eHi-Res audio processing at 24 bit\/96 kHz\u003c\/li\u003e\n\u003cli\u003eHigh-performance AKM® A\/D and D\/A converters\u003c\/li\u003e\n\u003cli\u003e10 Bands of fully parametric EQ, per output channel, including pre-outs\u003c\/li\u003e\n\u003cli\u003eShelving EQ option for Band 1 and Band 10\u003c\/li\u003e\n\u003cli\u003eHigh-Pass \u0026amp; Low-Pass Filters for each output channel, with selectable alignments and slopes:\u003c\/li\u003e\n\u003cli\u003eLinkwitz-Riley: 12, 24, 48 dB\/octave\u003c\/li\u003e\n\u003cli\u003eButterworth: 6, 12, 18, 24, 36, 48 dB\/octave\u003c\/li\u003e\n\u003cli\u003eSignal Delay in 0.01 millisecond steps (equivalent to 1\/8-inch, 3 mm)\u003c\/li\u003e\n\u003cli\u003eAll-Pass Filter (Phase EQ), with variable \"Q\" and corner frequency\u003c\/li\u003e\n\u003cli\u003ePolarity Reversal (0 or 180 deg.)\u003c\/li\u003e\n\u003cli\u003eOutput Level Trim in 0.1 dB steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNexD2™ Switching Amplifier Technology\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOur latest generation of high-speed switching technology delivers superb full-range power, fidelity and efficiency.\u003c\/li\u003e\n\u003cli\u003eDSP acts as central clock for all channels to improve audio quality and reduce noise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUltra-Versatile Analog and Digital Inputs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHigh-performance, differential-balanced analog inputs for outstanding noise rejection\u003c\/p\u003e\n\u003cp\u003eAccepts speaker level signals from 200 mV, up to 16V RMS, including those from many factory systems\u003c\/p\u003e\n\u003cp\u003eOptical Digital (Toslink) input permits direct connection of S\/PDIF digital sources, bypassing A\/D converter. Accepts up to 24 bit\/192 kHz input.\u003c\/p\u003e\n\u003cp\u003eIndependently configurable RCA analog and digital pre-outs (24 bit\/96 kHz)\u003c\/p\u003e\n\u003cp\u003eAutomatic turn-on options via Signal-Sensing or DC-Offset sensing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Compact Chassis Design\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolid cast alloy main unibody and bottom plate deliver superb EMI performance and shielding\u003c\/li\u003e\n\u003cli\u003eAll connections utilize compact mating connectors for maximum integrity and fitment into tight spaces.\u003c\/li\u003e\n\u003cli\u003eConfigurable LED logo ring displays status and can display audio preset color code or user-defined color\u003c\/li\u003e\n\u003cli\u003eLogo badge can be oriented in 90 degree increments\u003c\/li\u003e\n\u003cli\u003eCorner caps engineered to conceal mounting holes and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eJLid™ System Command and Control with Networking Capabilities\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's digital protocol provides control interface and communication between VXi amplifiers and optional JLid™ accessories, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDRC-100\/DRC-200\/DRC-205 (coming soon) Digital Remote Controllers: Offers convenient level and DSP preset control from the driver's seat.\u003c\/li\u003e\n\u003cli\u003eVXi-BTC Bluetooth® Communicator (coming soon): Permits wireless configuration of VXi amplifiers using your compatible Apple® or Android® device.\u003c\/li\u003e\n\u003cli\u003eVXi-HUB Optical Network Hub (coming soon): Provides network connectivity for up to five slave VXi amplifiers, allowing synchronization of DRC controllers and DSP presets. Up to two VXi-HUBs can be daisy-chained to network up to ten VXi amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791940550746,"sku":"91044","price":1439.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-amplifier-jl-audio-vx800-8i-vxi-series-8-channel-full-range-amplifier-dsp-amp-800w-rms-47166333976842.jpg?v=1786080646"},{"product_id":"jl-audio-vx600-6i-vxi-series-6-channel-full-range-amplifier-dsp-amp-600w-rms","title":"JL Audio VX600\/6i VXi Series 6 Channel Full Range Amplifier DSP Amp 600w RMS","description":"\u003cp\u003e\u003cstrong\u003eJL Audio VX600\/6i\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e6 Ch. Class D Full-Range Amplifier with Integrated DSP, 600 W\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVX600\/6i\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6-Channel Class D Full-Range Amplifier with Integrated DSP, 100 W x 6 @ 2 Ω \/ 75 W x 6 @ 4 Ω - 14.4V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned to simplify great audio, every VXi amplifier combines our advanced NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor.\u003c\/p\u003e\n\u003cp\u003eWith our second-generation NexD2™ technology, the VX600\/6i full-range amplifier outputs up to 75 watts per channel into 4 ohms, or 100 watts into 2 ohms. It can also be bridged into 4 ohms, producing up a rock-solid 200 W x 3.\u003c\/p\u003e\n\u003cp\u003eThe NexD2™ full-range technology in this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. The amplifier chassis is ultra-compact, with all connections on one side, to greatly simplify installation into tight spaces.\u003c\/p\u003e\n\u003cp\u003eInstead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN™ Software application installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTüN™ Software Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIntuitive setup and tuning, all at your fingertips. Automatically recognizes connected amplifier and displays appropriate interface. TüN™ is available for download for free in a variety of applications, for computers and most handheld devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnprecedented, Onboard DSP Tuning Power\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePremium, triple-core AKM® DSP with an optimized configuration, developed in collaboration with AKM®\u003c\/li\u003e\n\u003cli\u003eHi-Res audio processing at 24 bit\/96 kHz\u003c\/li\u003e\n\u003cli\u003eHigh-performance AKM® A\/D and D\/A converters\u003c\/li\u003e\n\u003cli\u003e10 Bands of fully parametric EQ, per output channel, including pre-outs\u003c\/li\u003e\n\u003cli\u003eShelving EQ option for Band 1 and Band 10\u003c\/li\u003e\n\u003cli\u003eHigh-Pass \u0026amp; Low-Pass Filters for each output channel, with selectable alignments and slopes:\u003c\/li\u003e\n\u003cli\u003eLinkwitz-Riley: 12, 24, 48 dB\/octave\u003c\/li\u003e\n\u003cli\u003eButterworth: 6, 12, 18, 24, 36, 48 dB\/octave\u003c\/li\u003e\n\u003cli\u003eSignal Delay in 0.01 millisecond steps (equivalent to 1\/8-inch, 3 mm)\u003c\/li\u003e\n\u003cli\u003eAll-Pass Filter (Phase EQ), with variable \"Q\" and corner frequency\u003c\/li\u003e\n\u003cli\u003ePolarity Reversal (0 or 180 deg.)\u003c\/li\u003e\n\u003cli\u003eOutput Level Trim in 0.1 dB steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNexD2™ Switching Amplifier Technology\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOur latest generation of high-speed switching technology delivers superb full-range power, fidelity and efficiency.\u003c\/li\u003e\n\u003cli\u003eDSP acts as central clock for all channels to improve audio quality and reduce noise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUltra-Versatile Analog and Digital Inputs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHigh-performance, differential-balanced analog inputs for outstanding noise rejection\u003c\/p\u003e\n\u003cp\u003eAccepts speaker level signals from 200 mV, up to 16V RMS, including those from many factory systems\u003c\/p\u003e\n\u003cp\u003eOptical Digital (Toslink) input permits direct connection of S\/PDIF digital sources, bypassing A\/D converter. Accepts up to 24 bit\/192 kHz input.\u003c\/p\u003e\n\u003cp\u003eIndependently configurable RCA analog and digital pre-outs (24 bit\/96 kHz)\u003c\/p\u003e\n\u003cp\u003eAutomatic turn-on options via Signal-Sensing or DC-Offset sensing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Compact Chassis Design\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolid cast alloy main unibody and bottom plate deliver superb EMI performance and shielding\u003c\/li\u003e\n\u003cli\u003eAll connections utilize compact mating connectors for maximum integrity and fitment into tight spaces.\u003c\/li\u003e\n\u003cli\u003eConfigurable LED logo ring displays status and can display audio preset color code or user-defined color\u003c\/li\u003e\n\u003cli\u003eLogo badge can be oriented in 90 degree increments\u003c\/li\u003e\n\u003cli\u003eCorner caps engineered to conceal mounting holes and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eJLid™ System Command and Control with Networking Capabilities\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's digital protocol provides control interface and communication between VXi amplifiers and optional JLid™ accessories, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDRC-100\/DRC-200\/DRC-205 (coming soon) Digital Remote Controllers: Offers convenient level and DSP preset control from the driver's seat.\u003c\/li\u003e\n\u003cli\u003eVXi-BTC Bluetooth® Communicator (coming soon): Permits wireless configuration of VXi amplifiers using your compatible Apple® or Android® device.\u003c\/li\u003e\n\u003cli\u003eVXi-HUB Optical Network Hub (coming soon): Provides network connectivity for up to five slave VXi amplifiers, allowing synchronization of DRC controllers and DSP presets. Up to two VXi-HUBs can be daisy-chained to network up to ten VXi amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791940583514,"sku":"91042","price":1269.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-amplifier-jl-audio-vx600-6i-vxi-series-6-channel-full-range-amplifier-dsp-amp-600w-rms-47166335451402.jpg?v=1786080632"},{"product_id":"jl-audio-vx700-5i-vxi-series-5-channel-full-range-amplifier-dsp-amp-700w-rms","title":"JL Audio VX700\/5i VXi Series 5 Channel Full Range Amplifier DSP Amp 700w RMS","description":"\u003cp\u003e\u003cstrong\u003eJL Audio VX700\/5i\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e5 Ch. Class D System Amplifier with Integrated DSP, 700 W\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVX700\/5i\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5-Channel Class D System Amplifier with Integrated DSP, 75 W x 4 @ 4 Ω + 300 W x 1 @ 2 Ω - 14.4V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned to simplify great audio, every VXi amplifier combines our advanced NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor.\u003c\/p\u003e\n\u003cp\u003eEmploying our second generation NexD2™ amplifier technology, the VX700\/5i efficiently powers a complete audio system. It can drive four main speakers with 75 W x 4 @ 4 ohms while also powering a subwoofer with up to 300W @ 2 ohms. Bridging the main channels converts it into a very powerful, 3-channel system amplifier with up to 200W x 2 @ 4 ohms on the main channels and 300W @ 2 ohms on the subwoofer channel.\u003c\/p\u003e\n\u003cp\u003eThe NexD2™ full-range technology in the main channels of this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. The subwoofer channel features an optimized low-frequency variant of the NexD2™ technology. The amplifier chassis is ultra-compact, with all connections on one side, to greatly simplify installation into tight spaces.\u003c\/p\u003e\n\u003cp\u003eInstead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN™ Software application installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTüN™ Software Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIntuitive setup and tuning, all at your fingertips. Automatically recognizes connected amplifier and displays appropriate interface. TüN™ is available for download for free in a variety of applications, for computers and most handheld devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnprecedented, Onboard DSP Tuning Power\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePremium, triple-core AKM® DSP with an optimized configuration, developed in collaboration with AKM®\u003c\/li\u003e\n\u003cli\u003eHi-Res audio processing at 24 bit\/96 kHz\u003c\/li\u003e\n\u003cli\u003eHigh-performance AKM® A\/D and D\/A converters\u003c\/li\u003e\n\u003cli\u003e10 Bands of fully parametric EQ, per output channel, including pre-outs\u003c\/li\u003e\n\u003cli\u003eShelving EQ option for Band 1 and Band 10\u003c\/li\u003e\n\u003cli\u003eHigh-Pass \u0026amp; Low-Pass Filters for each output channel, with selectable alignments and slopes:\u003c\/li\u003e\n\u003cli\u003eLinkwitz-Riley: 12, 24, 48 dB\/octave\u003c\/li\u003e\n\u003cli\u003eButterworth: 6, 12, 18, 24, 36, 48 dB\/octave\u003c\/li\u003e\n\u003cli\u003eSignal Delay in 0.01 millisecond steps (equivalent to 1\/8-inch, 3 mm)\u003c\/li\u003e\n\u003cli\u003eAll-Pass Filter (Phase EQ), with variable \"Q\" and corner frequency\u003c\/li\u003e\n\u003cli\u003ePolarity Reversal (0 or 180 deg.)\u003c\/li\u003e\n\u003cli\u003eOutput Level Trim in 0.1 dB steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNexD2™ Switching Amplifier Technology\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOur latest generation of high-speed switching technology delivers superb full-range power, fidelity and efficiency.\u003c\/li\u003e\n\u003cli\u003eDSP acts as central clock for all channels to improve audio quality and reduce noise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUltra-Versatile Analog and Digital Inputs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHigh-performance, differential-balanced analog inputs for outstanding noise rejection\u003c\/p\u003e\n\u003cp\u003eAccepts speaker level signals from 200 mV, up to 16V RMS, including those from many factory systems\u003c\/p\u003e\n\u003cp\u003eOptical Digital (Toslink) input permits direct connection of S\/PDIF digital sources, bypassing A\/D converter. Accepts up to 24 bit\/192 kHz input.\u003c\/p\u003e\n\u003cp\u003eIndependently configurable RCA analog and digital pre-outs (24 bit\/96 kHz)\u003c\/p\u003e\n\u003cp\u003eAutomatic turn-on options via Signal-Sensing or DC-Offset sensing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Compact Chassis Design\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolid cast alloy main unibody and bottom plate deliver superb EMI performance and shielding\u003c\/li\u003e\n\u003cli\u003eAll connections utilize compact mating connectors for maximum integrity and fitment into tight spaces.\u003c\/li\u003e\n\u003cli\u003eConfigurable LED logo ring displays status and can display audio preset color code or user-defined color\u003c\/li\u003e\n\u003cli\u003eLogo badge can be oriented in 90 degree increments\u003c\/li\u003e\n\u003cli\u003eCorner caps engineered to conceal mounting holes and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eJLid™ System Command and Control with Networking Capabilities\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's digital protocol provides control interface and communication between VXi amplifiers and optional JLid™ accessories, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDRC-100\/DRC-200\/DRC-205 (coming soon) Digital Remote Controllers: Offers convenient level and DSP preset control from the driver's seat.\u003c\/li\u003e\n\u003cli\u003eVXi-BTC Bluetooth® Communicator (coming soon): Permits wireless configuration of VXi amplifiers using your compatible Apple® or Android® device.\u003c\/li\u003e\n\u003cli\u003eVXi-HUB Optical Network Hub (coming soon): Provides network connectivity for up to five slave VXi amplifiers, allowing synchronization of DRC controllers and DSP presets. Up to two VXi-HUBs can be daisy-chained to network up to ten VXi amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791940649050,"sku":"91043","price":1189.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-amplifier-jl-audio-vx700-5i-vxi-series-5-channel-full-range-amplifier-dsp-amp-700w-rms-47166337351946.jpg?v=1786080619"},{"product_id":"jl-audio-rd400-4-full-range-class-d-4-channel-car-speaker-amp-amplifier-400w-rms","title":"JL Audio RD400\/4 Full Range Class D 4 Channel Car Speaker Amp Amplifier 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eRD400\/4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4 Ch. Class D Full-Range Amplifier, 400 W\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRD400\/4\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e4-Channel Class D Full-Range Amplifier, 100 W x 4 @ 2 Ω \/ 75 W x 4 @ 4 Ω - 14.4V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUtilizing our exclusive NexD™ high-speed switching technologies, the ultra-compact RD400\/4 amplifier is engineered to deliver loads of audio output power, with incredible efficiency and low distortion. Don’t let its modern styling and small size fool you though, this little powerhouse churns out 100 watts of crystal-clear audio from each of its four channels into 2 ohms (14.4V, 1% THD) and is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a whopping 200W x 2 into 4 ohms.\u003c\/p\u003e\n\u003cp\u003eFor your convenience, the RD400\/4’s controls can be found on top of the amplifier, beneath a protective cover, with all connections located along one side of its chassis. Studio-grade signal processing features include high or low-pass 12 dB \/ octave filters (defeatable) for each channel pair, with continuously variable frequency selection from 50-500 Hz, and dual-range, differential-balanced inputs capable of accepting most input voltage levels. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard equipment, along with all-new input type switches for bridging of stereo output channels without needing to use Y-adaptors.\u003c\/p\u003e\n\u003cp\u003eOnboard LED-clipping indicators are also included with your RD400\/4. This all-new, innovative feature lets you easily set your amplifier’s input sensitivity settings, quickly and accurately, with no special equipment needed. You’ll also find a set of preamp outputs on-hand, so you can pass signals to another amplifier, almost effortlessly. The RD400\/4 features a durable, black powder-coated finish and a top-mounted, dual-color LED light strip that reports the overall status and condition.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNexD™ Switching Technology\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNexD™ amplifier technologies produce exceptional audio quality, unsurpassed total efficiency and high power from very compact amplifier designs.\u003c\/p\u003e\n\u003cp\u003eBeginning with the original 'Slash' subwoofer amplifiers, JL Audio has been at the forefront of Class D amplifier design. Our NexD™ switching technology stems from our Class D expertise to deliver outstanding fidelity and efficiency, leading to compact amplifiers that deliver high power and exceptional value.\u003c\/p\u003e\n\u003cp\u003eLet's get a little nerdy... A traditional PWM switching amp design uses a fixed switching frequency and varies the pulse width based solely on the audio input signal to the pulse modulator. This basic approach assumes some ideal conditions, like a rock-steady power supply, that do not necessarily occur in a real, in-car installation. Power supply sag with signal causes distortion at all power levels with these designs, even well below clipping. The cure for this is feedback (a corrective signal sent back to the input side), but this becomes impractical as the audio frequency increases, making it a good solution for band-limited (subwoofer) amps, but not for full-range amplifiers.\u003c\/p\u003e\n\u003cp\u003eTaking the above into account when designing the NexD™ subwoofer amplifiers, we have taken the simple fixed PWM approach and enhanced it with a very high switching frequency: 240 kHz, which is about 4x higher than most Class D subwoofer amplifiers. This pushes the amplifier's bandwidth to at least 500 Hz with minimal distortion and improves efficiency, while keeping typically bulky circuity more compact. Your subwoofers will reward you with tight, rock-solid bass performance.\u003c\/p\u003e\n\u003cp\u003eFor the full-range NexD™ amplifiers and channels we applied a variable, ultra-high speed version of the NexD™ technology (switching at well over 400 kHz). In these designs, a self-oscillating modulator with \"feed-forward\" sends information about the instantaneous power supply voltage to the modulator, combining this with the input signal to cancel out any distortion due to supply voltage fluctuation. This reduces distortion prior to applying feedback, simplifying the overall feedback loop design.\u003c\/p\u003e\n\u003cp\u003eThe bottom line is simply great audio: clean, powerful and reliable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791940714586,"sku":"91023","price":309.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-amplifier-jl-audio-rd400-4-full-range-class-d-4-channel-car-speaker-amp-amplifier-400w-rms-47166343315722.jpg?v=1786095459"},{"product_id":"jl-audio-rd500-1-monoblock-1-channel-class-d-sub-subwoofer-amplifier-500w-rms","title":"JL Audio RD500\/1 Monoblock 1 Channel Class D Sub Subwoofer Amplifier 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eRD500\/1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonoblock Class D Subwoofer Amplifier, 500 W\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRD500\/1\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMonoblock Class D Subwoofer Amplifier, 500 W x 1 @ 2 Ω \/ 250 W x 1 @ 4 Ω - 14.4V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBorn to produce a whopping 500 watts into 2 ohms (14.4V, 1% THD), the RD500\/1 amplifier was engineered to generate tons of pure subwoofer bliss from a sleek, ultra-compact chassis. The secret behind its power proficiency is our proprietary NexD™ switching technology, which delivers large amounts of power output with precise efficiency and ultra-low distortion.\u003c\/p\u003e\n\u003cp\u003eFor your convenience, the RD500\/1’s controls are located on top of the amplifier, beneath a protective cover, with all connections found along one side of its chassis. Signal processing features include a 12 dB \/ octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balanced inputs are also on-hand, capable of accepting most input voltage levels. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.\u003c\/p\u003e\n\u003cp\u003eThe RD500\/1 is also equipped with an onboard LED-clipping indicator. This all-new, innovative feature lets you easily set your amplifier’s input sensitivity setting, quickly and accurately, with no special equipment needed. The RD500\/1 features a durable, black powder-coated finish and a top-mounted, dual-color LED light strip that reports the overall status and condition. With the addition of an RBC-1 remote level control (sold separately), you can control the subwoofer output directly from the driver’s seat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNexD™ Switching Technology\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNexD™ amplifier technologies produce exceptional audio quality, unsurpassed total efficiency and high power from very compact amplifier designs.\u003c\/p\u003e\n\u003cp\u003eBeginning with the original 'Slash' subwoofer amplifiers, JL Audio has been at the forefront of Class D amplifier design. Our NexD™ switching technology stems from our Class D expertise to deliver outstanding fidelity and efficiency, leading to compact amplifiers that deliver high power and exceptional value.\u003c\/p\u003e\n\u003cp\u003eLet's get a little nerdy... A traditional PWM switching amp design uses a fixed switching frequency and varies the pulse width based solely on the audio input signal to the pulse modulator. This basic approach assumes some ideal conditions, like a rock-steady power supply, that do not necessarily occur in a real, in-car installation. Power supply sag with signal causes distortion at all power levels with these designs, even well below clipping. The cure for this is feedback (a corrective signal sent back to the input side), but this becomes impractical as the audio frequency increases, making it a good solution for band-limited (subwoofer) amps, but not for full-range amplifiers.\u003c\/p\u003e\n\u003cp\u003eTaking the above into account when designing the NexD™ subwoofer amplifiers, we have taken the simple fixed PWM approach and enhanced it with a very high switching frequency: 240 kHz, which is about 4x higher than most Class D subwoofer amplifiers. This pushes the amplifier's bandwidth to at least 500 Hz with minimal distortion and improves efficiency, while keeping typically bulky circuity more compact. Your subwoofers will reward you with tight, rock-solid bass performance.\u003c\/p\u003e\n\u003cp\u003eFor the full-range NexD™ amplifiers and channels we applied a variable, ultra-high speed version of the NexD™ technology (switching at well over 400 kHz). In these designs, a self-oscillating modulator with \"feed-forward\" sends information about the instantaneous power supply voltage to the modulator, combining this with the input signal to cancel out any distortion due to supply voltage fluctuation. This reduces distortion prior to applying feedback, simplifying the overall feedback loop design.\u003c\/p\u003e\n\u003cp\u003eThe bottom line is simply great audio: clean, powerful and reliable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791940845658,"sku":"91024","price":299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-amplifier-jl-audio-rd500-1-monoblock-1-channel-class-d-sub-subwoofer-amplifier-500w-rms-47166344265994.jpg?v=1786095448"},{"product_id":"jl-audio-8w3v3-4-8-20cm-w3-series-car-sub-subwoofer-driver-4ohm-250w-rms-1","title":"JL Audio 8W3V3-4 8\" 20cm W3 Series Car Sub Subwoofer Driver 4ohm 250w RMS","description":"\u003cp\u003e\u003cstrong\u003e8W3v3-4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e8-inch (200 mm) Subwoofer Driver, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eW3v3 8-inch Subwoofer Driver (250 W, 4 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you need an 8-inch subwoofer that can create outstanding bass in extremely small enclosures, the 8W3v3 will do the job and surprise you with its power and accuracy. It employs the same technologies as its larger diameter brethren to deliver a whopping 0.375 in. (10 mm) of controlled, one-way, linear excursion.\u003c\/p\u003e\n\u003cp\u003eThe 8W3v3-4 is best used with amplifier power in the 75W - 250W range and is optimized to operate in a tiny 0.30 cu. ft. (8.5 l) sealed enclosure, or a 0.35 cu. ft. (9.9 l) ported enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDynamic Motor Analysis - DMA Optimized Motor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElevated Frame Cooling \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented Elevated Frame Cooling design delivers cool air through slots directly above the top-plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFloating Cone Attach Method - FCAM™ \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis assembly technique, conceived by JL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVented Reinforcement Collar\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's Vented Reinforcement Collar (VRC®) improves the rigidity and stability of the cone\/spider\/voice coil junction and directs airflow over the voice coil windings for improved thermal performance.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791940943962,"sku":"90944","price":299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-subwoofer-jl-audio-8w3v3-4-8-20cm-w3-series-car-sub-subwoofer-driver-4ohm-250w-rms-47166355767562.jpg?v=1786095396"},{"product_id":"jl-audio-12w3v3-4-12-30cm-w3-series-car-sub-subwoofer-driver-4ohm-500w-rms-1","title":"JL Audio 12W3v3-4 12\" 30cm W3 Series Car Sub Subwoofer Driver 4ohm 500w RMS","description":"\u003cp\u003e\u003cstrong\u003e12W3v3-4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e12-inch (300 mm) Subwoofer Driver, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eW3v3 12-inch Subwoofer (500 W, 4 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis powerhouse 12-inch driver delivers potent performance and world-class sound quality in medium power applications. Several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 12W3v3 to enhance linearity and reliability.\u003c\/p\u003e\n\u003cp\u003eThe 12W3v3-4 is best used with amplifier power in the 150W - 500W range and is optimized to operate in a compact 1.125 cu. ft. (31.8 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDynamic Motor Analysis - DMA Optimized Motor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElevated Frame Cooling \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented Elevated Frame Cooling design delivers cool air through slots directly above the top-plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFloating Cone Attach Method - FCAM™ \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis assembly technique, conceived by JL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVented Reinforcement Collar\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's Vented Reinforcement Collar (VRC®) improves the rigidity and stability of the cone\/spider\/voice coil junction and directs airflow over the voice coil windings for improved thermal performance.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791941075034,"sku":"90934","price":379.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-subwoofer-jl-audio-12w3v3-4-12-30cm-w3-series-car-sub-subwoofer-driver-4ohm-500w-rms-47166357143818.jpg?v=1786095382"},{"product_id":"jl-audio-12w3v3-2-12-30cm-w3-series-car-sub-subwoofer-driver-2ohm-500w-rms-1","title":"JL Audio 12W3v3-2 12\" 30cm W3 Series Car Sub Subwoofer Driver 2ohm 500w RMS","description":"\u003cp\u003e\u003cstrong\u003e12W3v3-2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e12-inch (300 mm) Subwoofer Driver, 2 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eW3v3 12-inch Subwoofer (500 W, 2 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis powerhouse 12-inch driver delivers potent performance and world-class sound quality in medium power applications. Several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 12W3v3 to enhance linearity and reliability.\u003c\/p\u003e\n\u003cp\u003eThe 12W3v3-2 is best used with amplifier power in the 150W - 500W range and is optimized to operate in a compact 1.25 cu. ft. (35.4 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791941173338,"sku":"90933","price":379.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-subwoofer-jl-audio-12w3v3-2-12-30cm-w3-series-car-sub-subwoofer-driver-2ohm-500w-rms-47166358159626.jpg?v=1786095371"},{"product_id":"jl-audio-c2-525x-c2-series-5-25-13cm-coaxial-car-door-speakers-60w-rms-pair","title":"JL Audio C2-525x C2 Series 5.25\" 13cm Coaxial Car Door Speakers 60w RMS","description":"\u003cp\u003e\u003cstrong\u003eC2-525x\n\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e5.25-inch (130 mm) Coaxial Speaker System\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eC2-525x\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCoaxial Speaker System: 5.25-inch (130 mm) Woofer, 0.75-inch (19 mm) Silk Dome Tweeter\u003c\/p\u003e\n\u003cp\u003eThe Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs.\u003c\/p\u003e\n\u003cp\u003eThe C2-525x system features 5.25-inch (130 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.\u003c\/p\u003e\n\u003cp\u003eTweeters are coaxially mounted and built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles.\u003c\/p\u003e\n\u003cp\u003eSpeaker grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo.\u003c\/p\u003e\n\u003cp\u003eSonic character: Clean and Dynamic\u003c\/p\u003e\n\u003cp\u003eSold as a pair.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791941271642,"sku":"90966","price":139.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-speakers-jl-audio-c2-525x-c2-series-5-25-13cm-coaxial-car-door-speakers-60w-rms-pair-47166361796874.jpg?v=1786095361"},{"product_id":"jl-audio-c2-650x-c2-series-6-5-17cm-coaxial-car-door-speakers-60w-rms-pair","title":"JL Audio C2-650x C2 Series 6.5\" 17cm Coaxial Car Door Speakers 60w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eC2-650x\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e6.5-inch (165 mm) Coaxial Speaker System\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eC2-650x\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCoaxial Speaker System: 6.5-inch (165 mm) Woofer, 0.75-inch (19 mm) Silk Dome Tweeter\u003c\/p\u003e\u003cp\u003eThe Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs.\u003c\/p\u003e\u003cp\u003eThe C2-650x system features 6.5-inch (165 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.\u003c\/p\u003e\u003cp\u003eThe 6.5-inch (165 mm) format is a direct fit in many vehicles. Multiple mounting patterns are provided on the woofer frame for easy installation into most vehicles that accept a 6.5-inch (165 mm) speaker.\u003c\/p\u003e\u003cp\u003eTweeters are coaxially mounted and built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles.\u003c\/p\u003e\u003cp\u003eWoofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo.\u003c\/p\u003e\u003cp\u003eSonic character: Clean and Dynamic\u003c\/p\u003e\u003cp\u003eSold as a pair.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791941337178,"sku":"90971","price":169.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-speakers-jl-audio-c2-650x-c2-series-6-5-17cm-coaxial-car-door-speakers-60w-rms-pair-47166363304202.jpg?v=1786095351"},{"product_id":"jl-audio-c2-690tx-c2-series-6x9-coaxial-car-parcel-shelf-speakers-70w-rms-pair-1","title":"JL Audio C2-690tx C2 Series 6x9\" Coaxial Car Parcel Shelf Speakers 70w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eC2-690tx\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e6 x 9-inch (150 x 230 mm) 3-Way Coaxial Speaker System\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eC2-690tx Coaxial 3-Way Speaker System: 6 x 9-inch (150 x 230 mm) Woofer, 2-inch (51 mm) Cone Mid-Range, 0.75-inch (19 mm) Silk Dome Tweeter\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs.\u003c\/p\u003e\n\u003cp\u003eThe C2-690tx system features 6 x 9-inch (150 x 230 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.\u003c\/p\u003e\n\u003cp\u003eThe 6 x 9-inch (150 x 230 mm) format is a direct fit in many vehicles.\u003c\/p\u003e\n\u003cp\u003eThe Mid-Range driver is ferrofluid-cooled, with a 2-inch Mylar® cone diaphragm to smoothly bridge the gap between the woofer and the dome tweeter.\u003c\/p\u003e\n\u003cp\u003eTweeters are mounted next to the mid-range driver and built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles.\u003c\/p\u003e\n\u003cp\u003eWoofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo.\u003c\/p\u003e\n\u003cp\u003eSonic character: Clean and Dynamic\u003c\/p\u003e\n\u003cp\u003eSold as a pair.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791941435482,"sku":"90972","price":199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-speakers-jl-audio-c2-690tx-c2-series-6x9-coaxial-car-parcel-shelf-speakers-70w-rms-pair-47166365139210.jpg?v=1786095343"},{"product_id":"jl-audio-c2-525-c2-series-5-25-13cm-component-car-door-speakers-60w-rms-pair","title":"JL Audio C2-525 C2 Series 5.25\" 13cm Component Car Door Speakers 60w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eC2-525\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e5.25-inch (130 mm) 2-Way Component Speaker System\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eC2-525\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e2-Way Component System: 5.25-inch (130 mm) Woofer, 0.75-inch (19 mm) Silk Dome Tweeter\u003c\/p\u003e\u003cp\u003eThe Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and long linear excursion woofer designs.\u003c\/p\u003e\u003cp\u003eThe C2-525 system features 5.25-inch (130 mm) component woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.\u003c\/p\u003e\u003cp\u003eThe C2 component tweeters are built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs.\u003c\/p\u003e\u003cp\u003eC2 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Three levels of tweeter attenuation are provided, as well as a tweeter protector.\u003c\/p\u003e\u003cp\u003eWoofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo.\u003c\/p\u003e\u003cp\u003eSonic character: Clean and Dynamic\u003c\/p\u003e\u003cp\u003eSold as a pair.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791941533786,"sku":"90965","price":219.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-speakers-jl-audio-c2-525-c2-series-5-25-13cm-component-car-door-speakers-60w-rms-pair-47166366318858.jpg?v=1786095328"},{"product_id":"jl-audio-cp108lg-w3v3-sub-8-microsub-ported-subwoofer-enclosure-250w-rms-1","title":"JL Audio CP108LG-W3V3 Sub 8\" MicroSub Ported Subwoofer Enclosure 250w RMS","description":"\u003cp\u003e\u003cstrong\u003eCP108LG-W3v3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 8W3v3 MicroSub, Ported, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosed Subwoofer System with Single 8W3v3-4 Subwoofer Driver, Black Carpet (250 W, 4 Ω) - Ported Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCP108LG Product Spotlight\u003c\/p\u003e\n\u003cp\u003eThis incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its 8W3v3 subwoofer driver into an efficient slot-ported design.\u003c\/p\u003e\n\u003cp\u003eExtensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port.\u003c\/p\u003e\n\u003cp\u003eThis subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.\u003c\/p\u003e\n\u003cp\u003eFinish: Black, high-grade automotive carpet with silver \"JL AUDIO\" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eRecommended amplifier power: 100 - 250W\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 4 Ω\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791941632090,"sku":"90986","price":409.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-subwoofer-jl-audio-cp108lg-w3v3-sub-8-microsub-ported-subwoofer-enclosure-250w-rms-47166368579850.jpg?v=1786095310"},{"product_id":"jl-audio-cp110-w0v3-sub-10-single-w0-basswedge-ported-subwoofer-300w-rms","title":"JL Audio CP110-W0V3 Sub 10\" Single W0 BassWedge Ported Subwoofer 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eCP110-W0v3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 10W0v3 BassWedge, Ported, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosed Subwoofer System with Single 10W0v3-4 Subwoofer, Dark Gray Carpet (300 W, 4 Ω) - Ported Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value.\u003c\/p\u003e\n\u003cp\u003eThe slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises.\u003c\/p\u003e\n\u003cp\u003eThe ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofer firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle.\u003c\/p\u003e\n\u003cp\u003eThis subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal.\u003c\/p\u003e\n\u003cp\u003eFinish: Dark gray, high-grade automotive carpet with \"JL AUDIO\" embroidery on the top edge and \"Slot-Ported BassWedge™\" embroidered on the port mouth.\u003c\/p\u003e\n\u003cp\u003eConstruction: MDF\u003c\/p\u003e\n\u003cp\u003eRecommended amplifier power: 75 - 300W\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 4 Ω\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791941730394,"sku":"90987","price":249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-subwoofer-jl-audio-cp110-w0v3-sub-10-single-w0-basswedge-ported-subwoofer-300w-rms-55022528397578.jpg?v=1786095300"},{"product_id":"jl-audio-cp112-w0v3-sub-12-single-w0-basswedge-ported-subwoofer-300w-rms","title":"JL Audio CP112-W0V3 Sub 12\" Single W0 BassWedge Ported Subwoofer 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eCP112-W0v3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 12W0v3 BassWedge, Ported, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosed Subwoofer System with Single 12W0v3-4 Subwoofer, Dark Gray Carpet (300 W, 4 Ω) - Ported Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value.\u003c\/p\u003e\n\u003cp\u003eThe slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises.\u003c\/p\u003e\n\u003cp\u003eThe ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofer firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle.\u003c\/p\u003e\n\u003cp\u003eThis subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal.\u003c\/p\u003e\n\u003cp\u003eFinish: Dark gray, high-grade automotive carpet with \"JL AUDIO\" embroidery on the top edge and \"Slot-Ported BassWedge™\" embroidered on the port mouth.\u003c\/p\u003e\n\u003cp\u003eConstruction: MDF\u003c\/p\u003e\n\u003cp\u003eRecommended amplifier power: 75 - 300W\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 4 Ω\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791941828698,"sku":"90988","price":309.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-subwoofer-jl-audio-cp112-w0v3-sub-12-single-w0-basswedge-ported-subwoofer-300w-rms-47166371397898.jpg?v=1786095285"},{"product_id":"jl-audio-cp212-w0v3-12-30cm-dual-12w0v3-basswedge-ported-subwoofer-600w-rms-1","title":"JL Audio CP212-W0v3 12\" 30cm Dual 12W0v3 BassWedge Ported Subwoofer 600w RMS","description":"\u003cp\u003e\u003cstrong\u003eCP212-WØv3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eDual 12W0v3 BassWedge, Ported, 2 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosed Subwoofer System with Dual 12W0v3-4 Subwoofers, Dark Gray Carpet (600 W, 2 Ω) - Ported Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value.\u003c\/p\u003e\n\u003cp\u003eThe slot-port runs along the bottom of the enclosure and fires on the same plane as the woofers to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises.\u003c\/p\u003e\n\u003cp\u003eThe ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofers firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle.\u003c\/p\u003e\n\u003cp\u003eThis subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal.\u003c\/p\u003e\n\u003cp\u003eFinish: Dark gray, high-grade automotive carpet with \"JL AUDIO\" embroidery on the top edge and \"Slot-Ported BassWedge™\" embroidered on the port mouth.\u003c\/p\u003e\n\u003cp\u003eConstruction: MDF\u003c\/p\u003e\n\u003cp\u003eRecommended amplifier power: 150 - 600W\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 2 Ω\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791941927002,"sku":"90991","price":729.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-subwoofer-jl-audio-cp212-w0v3-12-30cm-dual-12w0v3-basswedge-ported-subwoofer-600w-rms-47166373232906.jpg?v=1786095272"},{"product_id":"jl-audio-12w0v3-4-12-30cm-w0-series-car-sub-subwoofer-driver-4ohm-300w-rms","title":"JL Audio 12W0v3-4 12\" 30cm W0 Series Car Sub Subwoofer Driver 4ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003e12W0v3-4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e12-inch (300 mm) Subwoofer Driver, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWØv3 12-inch Subwoofer Driver (300 W, 4 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 12WØv3 is a rugged performer with excellent efficiency, excursion capability and linearity. Its overall performance envelope that puts it right at the top of its price class. It features a beefy 2 in. diameter voice coil and our patented Elevated Frame Cooling design for enhanced power handling and reliability.\u003c\/p\u003e\n\u003cp\u003eThe 12WØv3 is best used with amplifier power in the 75W - 300W range and is optimized to operate in a moderately sized 1.375 cu. ft. (38.9 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791942025306,"sku":"90930","price":189.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-subwoofer-jl-audio-12w0v3-4-12-30cm-w0-series-car-sub-subwoofer-driver-4ohm-300w-rms-47166374215946_de6f49de-a847-435c-9c61-71a317b63b55.jpg?v=1786095259"},{"product_id":"jl-audio-c2-570x-c2-series-5x7-6x8-coaxial-car-door-speakers-60w-rms-pair","title":"JL Audio C2-570x C2 Series 5x7\" 6x8\" Coaxial Car Door Speakers 60w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eC2-570x\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e5 x 7 \/ 6 x 8-inch (125 x 180 mm) Coaxial Speaker System\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eC2-570x\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCoaxial Speaker System: 5 x 7 \/ 6 x 8-inch (125 x 180 mm) Woofer, 0.75-inch (19 mm) Silk Dome Tweeter\u003c\/p\u003e\u003cp\u003eThe Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs.\u003c\/p\u003e\u003cp\u003eMany people mistakenly believe that an oval speaker cannot perform as well as a round one, leading to many instances of 5.25-inch speakers being installed into 5 x 7-inch openings. JL Audio has put in the engineering time and effort to create fantastic-sounding speakers that drop into oval openings and deliver equivalent performance to our 6.5-inch (165 mm) round speaker systems... guaranteed. So, don't make the mistake of losing cone area and efficiency by stepping down to a smaller round speaker... these ovals are as impressive as our round format systems.\u003c\/p\u003e\u003cp\u003eThe C2-570x system features 5 x 7 \/ 6 x 8-inch (125 x 180 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.\u003c\/p\u003e\u003cp\u003eTweeters are coaxially mounted and built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles.\u003c\/p\u003e\u003cp\u003eGrilles are not available for this speaker system.\u003c\/p\u003e\u003cp\u003eSonic character: Clean and Dynamic\u003c\/p\u003e\u003cp\u003eSold as a pair.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791942090842,"sku":"90967","price":149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-speakers-jl-audio-c2-570x-c2-series-5x7-6x8-coaxial-car-door-speakers-60w-rms-pair-47166375756042.jpg?v=1786095251"},{"product_id":"jl-audio-cp106lg-w3v3-sub-6-microsub-slot-ported-subwoofer-enclosure-150w-rms","title":"JL Audio CP106LG-W3V3 Sub 6\" MicroSub Slot Ported Subwoofer Enclosure 150w RMS","description":"\u003cp\u003e\u003cstrong\u003eCP106LG-W3v3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 6W3v3 MicroSub, Ported, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosed Subwoofer System with Single 6W3v3-4 Subwoofer Drivers, Black Carpet (150 W, 4 Ω) - Ported Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its 6W3v3 subwoofer driver into an efficient slot-ported design.\u003c\/p\u003e\n\u003cp\u003eExtensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port.\u003c\/p\u003e\n\u003cp\u003eThis subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.\u003c\/p\u003e\n\u003cp\u003eFinish: Black, high-grade automotive carpet with silver \"JL AUDIO\" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eRecommended amplifier power: 50 - 150W\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 4 Ω\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791942221914,"sku":"90985","price":339.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-subwoofer-jl-audio-cp106lg-w3v3-sub-6-microsub-slot-ported-subwoofer-enclosure-150w-rms-47166376050954.jpg?v=1786095237"},{"product_id":"jl-audio-12w1v3-4-12-30cm-w1-series-car-sub-subwoofer-driver-4ohm-300w-rms","title":"JL Audio 12W1v3-4 12\" 30cm W1 Series Car Sub Subwoofer Driver 4ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003e12W1v3-4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e12-inch (300 mm) Subwoofer Driver, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eW1v3 12-inch Subwoofer Driver (300 W, 4 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eW1v3 Product Spotlight\u003c\/p\u003e\n\u003cp\u003eThe 12W1v3 is a lightweight 12-inch driver with excellent performance capabilities at moderate power levels. It features moderate mounting depth with no pole-vent, so the rear of the motor structure can be placed directly against an enclosure boundary. Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio's proprietary technologies enhance its performance and reliability.\u003c\/p\u003e\n\u003cp\u003eThe The 12W1v3-4 is best used with amplifier power in the 75W - 300W range and is optimized to operate in a compact 1.10 cu. ft. (31.5 l) sealed enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791942320218,"sku":"90932","price":264.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-subwoofer-jl-audio-12w1v3-4-12-30cm-w1-series-car-sub-subwoofer-driver-4ohm-300w-rms-47166378705162.jpg?v=1786095224"},{"product_id":"jl-audio-c3-100ct-1-25mm-car-component-tweeters-crossovers-pair-75w-rms","title":"JL Audio C3-100CT 1\" 25mm Car Component Tweeters \u0026 Crossovers Pair 75w RMS","description":"\u003cp\u003e\u003cstrong\u003eC3-100ct\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1-inch (25 mm) Component Tweeters, Pair\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eC3-100ct\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1-inch (25 mm) Silk Dome Tweeters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe silk dome tweeter is prized by audiophiles for delivering realistic, non-fatiguing, high-frequency performance.\u003c\/p\u003e\n\u003cp\u003eThe C3 component tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be installed coaxially onto the C3 woofers using the fixtures included with the C3 Component \/ Coaxial Systems.\u003c\/p\u003e\n\u003cp\u003eInline 12 dB \/ octave high-pass filters with tweeter protectors are included with this kit. The C5-075ct is designed to operate above 4 kHz with a minimum high-pass slope of 12 dB \/ octave.\u003c\/p\u003e\n\u003cp\u003eSonic character: Clean and Powerful\u003c\/p\u003e\n\u003cp\u003eSold as a pair.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791942418522,"sku":"90973","price":154.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-speakers-jl-audio-c3-100ct-1-25mm-car-component-tweeters-crossovers-pair-75w-rms-47166380409098.jpg?v=1786095219"},{"product_id":"jl-audio-c1-400x-c1-series-4-10cm-coaxial-car-door-dash-speakers-50w-rms-pair-1","title":"JL Audio C1-400x C1 Series 4\" 10cm Coaxial Car Door Dash Speakers 50w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eC1-400\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e 4-inch (100 mm) Coaxial Speaker System\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eC1-400x\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCoaxial Speaker System: 4-inch (100 mm) Woofer, 0.75-inch (19 mm) Aluminum Dome Tweeter\u003c\/p\u003e\u003cp\u003eC1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.\u003c\/p\u003e\u003cp\u003eTo facilitate fit, breakaway mounting tabs on the woofer frame allow the C1-400x to be installed in four-hole or two-hole mounting configurations.\u003c\/p\u003e\u003cp\u003eC1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-400x is a proprietary, stamped, steel 4-inch (100 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.\u003c\/p\u003e\u003cp\u003eEquipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling.\u003c\/p\u003e\u003cp\u003eWhen it comes to value, C1 is the real deal!\u003c\/p\u003e\u003cp\u003eSold as a pair. Grilles not included.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791942484058,"sku":"90954","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-speakers-jl-audio-c1-400x-c1-series-4-10cm-coaxial-car-door-dash-speakers-50w-rms-pair-47166382113034.jpg?v=1786095211"},{"product_id":"jl-audio-c1-690x-c1-series-6x9-coaxial-car-parcel-shelf-speakers-60w-rms-pair","title":"JL Audio C1-690x C1 Series 6x9\" Coaxial Car Parcel Shelf Speakers 60w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eC1-690x\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e6 x 9-inch (150 x 230 mm) Coaxial Speaker System\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eC1-690x\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCoaxial Speaker System: 6 x 9-inch (150 x 230 mm) Woofer, 1.0-inch (25 mm) Aluminum Dome Tweeter\u003c\/p\u003e\u003cp\u003eC1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.\u003c\/p\u003e\u003cp\u003eTo facilitate fit, spacer\/adaptor rings are included allowing the C1-690x to be installed in bottom-mount applications.\u003c\/p\u003e\u003cp\u003eC1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-690x is a proprietary, stamped, steel 6 x 9-inch (150 x 230 mm) oval frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.\u003c\/p\u003e\u003cp\u003eEquipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling.\u003c\/p\u003e\u003cp\u003eWhen it comes to value, C1 is the real deal!\u003c\/p\u003e\u003cp\u003eSold as a pair. Grilles not included.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791942582362,"sku":"90961","price":109.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-speakers-jl-audio-c1-690x-c1-series-6x9-coaxial-car-parcel-shelf-speakers-60w-rms-pair-47166383456522.jpg?v=1786095200"},{"product_id":"jl-audio-c1-690tx-c1-series-6x9-coaxial-car-parcel-shelf-speakers-60w-rms-pair-1","title":"JL Audio C1-690tx C1 Series 6x9\" Coaxial Car Parcel Shelf Speakers 60w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eC1-690tx\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e6 x 9-inch (150 x 230 mm) 3-Way Coaxial Speaker System\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eC1-690tx\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCoaxial 3-Way Speaker System: 6 x 9-inch (150 x 230 mm) Woofer, 1.0-inch (25 mm) Aluminum Dome Tweeter, 0.75-inch (19 mm) Aluminum Dome Super Tweeter\u003c\/p\u003e\u003cp\u003eC1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.\u003c\/p\u003e\u003cp\u003eTo facilitate fit, spacer adaptor rings are included allowing the C1-690tx to be installed in bottom-mount applications.\u003c\/p\u003e\u003cp\u003eC1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-690tx is a proprietary, stamped, steel 6 x 9-inch (150 x 230 mm) oval frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.\u003c\/p\u003e\u003cp\u003eEquipped with dual true, edge-driven, aluminum dome tweeters, the C1-690tx stands apart from others in its category with superior high-frequency clarity and separation. The design of each tweeter delivers inherently excellent off-axis response and high-frequency extension. Both high-frequency drivers also benefit from the damping of silk surround suspensions and Ferrofluid in the voice coil gaps, along with the superior strength of neodymium magnetics. A true, mixed order filter network is employed to further enhance smoothness and improve power handling.\u003c\/p\u003e\u003cp\u003eWhen it comes to value, C1 is the real deal!\u003c\/p\u003e\u003cp\u003eSold as a pair. Grilles not included.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791942647898,"sku":"90960","price":139.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-speakers-jl-audio-c1-690tx-c1-series-6x9-coaxial-car-parcel-shelf-speakers-60w-rms-pair-47166385062154.jpg?v=1786095188"},{"product_id":"jl-audio-c1-650-c1-series-6-5-16-5cm-component-car-door-speakers-50w-rms-pair","title":"JL Audio C1-650 C1 Series 6.5\" 16.5cm Component Car Door Speakers 50w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eC1-650\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e6.5-inch (165 mm) 2-Way Component Speaker System\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eC1-650\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2-Way Component System: 6.5-inch (165 mm) Woofer, 0.75-inch (19 mm) Aluminum Dome Tweeter\u003c\/p\u003e\n\u003cp\u003eC1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.\u003c\/p\u003e\n\u003cp\u003eTo facilitate fit, multi-application adaptor rings are included for the C1-650 woofers, allowing easy, drop-in installation in vehicles equipped with oversized 6.5-inch and 6.75-inch speaker openings. Without the ring, the woofers will also fit into many \"6-inch\" speaker locations as well. Surface and flush mounts are included with C1 tweeters for maximum installation versatility.\u003c\/p\u003e\n\u003cp\u003eC1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-650 is a proprietary, stamped, steel 6.50-inch (165 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control the voice coil's motion. Tinsel leads are carefully routed and attached to the spiders to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.\u003c\/p\u003e\n\u003cp\u003eEquipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. An in-line, outboard 2nd order high-pass filter, with Advanced Tweeter Protection Circuitry, is included to further enhance smoothness and improve power handling.\u003c\/p\u003e\n\u003cp\u003eWhen it comes to value, C1 is the real deal!\u003c\/p\u003e\n\u003cp\u003eSold as a pair. Grilles not included.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791942746202,"sku":"90957","price":129.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-speakers-jl-audio-c1-650-c1-series-6-5-16-5cm-component-car-door-speakers-50w-rms-pair-47166386700554.jpg?v=1786095174"},{"product_id":"jl-audio-c1-100ct-1-25mm-car-component-tweeters-crossovers-pair-60w-rms","title":"JL Audio C1-100CT 1\" 25mm Car Component Tweeters \u0026 Crossovers Pair 60w RMS","description":"\u003cp\u003e\u003cstrong\u003eC1-100ct\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1-inch (25 mm) Component Tweeters, Pair\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eC1-100ct\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.0-inch (25 mm) Aluminum Dome Tweeters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eC1 component tweeters are engineered to deliver refined performance, with excellent off-axis response and high-frequency extension. Utilizing true, edge driven 1.0-inch aluminum domes with silk suspensions, the C1-100ct component tweeters provide smooth, detailed reproduction of treble frequencies from 3.6 – 22 kHz.\u003c\/p\u003e\n\u003cp\u003eThe tweeters can be flush-mounted or surface-mounted with the supplied fixtures to fit a wide variety of installation needs. Inline, outboard, 12 dB \/ octave, high-pass filters are included to ensure smooth response and reliability. These fliters also are equipped with Advanced Tweeter Protection Circuitry to improve power handling and reliability.\u003c\/p\u003e\n\u003cp\u003eWhen it comes to value, C1 is the real deal!\u003c\/p\u003e\n\u003cp\u003eSold as a pair. Surface-mount and flush-mount fixtures and grilles are included.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791942844506,"sku":"90953","price":59.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-speakers-jl-audio-c1-100ct-1-25mm-car-component-tweeters-crossovers-pair-60w-rms-47166387388682.jpg?v=1786095168"},{"product_id":"jl-audio-12w1v3-2-12-30cm-w1-series-car-sub-subwoofer-driver-2ohm-300w-rms","title":"JL Audio 12W1v3-2 12\" 30cm W1 Series Car Sub Subwoofer Driver 2ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003e12W1v3-2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e12-inch (300 mm) Subwoofer Driver, 2 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eW1v3 12-inch Subwoofer Driver (300 W, 2 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eW1v3 Product Spotlight\u003c\/p\u003e\n\u003cp\u003eThe 12W1v3 is a lightweight 12-inch driver with excellent performance capabilities at moderate power levels. It features moderate mounting depth with no pole-vent, so the rear of the motor structure can be placed directly against an enclosure boundary. Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio's proprietary technologies enhance its performance and reliability.\u003c\/p\u003e\n\u003cp\u003eThe 12W1v3-2 is best used with amplifier power in the 75W - 300W range and is optimized to operate in a compact 1.10 cu. ft. (31.5 l) sealed enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791942942810,"sku":"90931","price":289.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-subwoofer-jl-audio-12w1v3-2-12-30cm-w1-series-car-sub-subwoofer-driver-2ohm-300w-rms-47166389846282.jpg?v=1786095156"},{"product_id":"jl-audio-jd500-1-jd-series-monoblock-amp-class-d-subwoofer-amplifier-500w-rms","title":"JL Audio JD500\/1 JD Series Monoblock Amp Class D Subwoofer Amplifier 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eJD500\/1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eMonoblock Class D Subwoofer Amplifier, 500 W x 1 @ 2 Ω \/ 250 W x 1 @ 4 Ω - 14.4V\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonoblock Class D Subwoofer Amplifier, 500 W x 1 @ 2 Ω \/ 250 W x 1 @ 4 Ω - 14.4V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned to produce a whopping 500 watts into 2 ohms (14.4V, 1% THD), the JD500\/1 amplifier is a great solution for powering subwoofers in a cost-conscious system. Our proprietary NexD™ switching technology delivers large amounts of real-world power output with excellent efficiency and ultra-low distortion.\u003c\/p\u003e\n\u003cp\u003eThe JD500\/1’s controls are located on the input panel. while the power and speaker connections can be found along the opposite end of its extruded aluminum chassis. Signal processing features include a 12 dB \/ octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balanced inputs are also on-hand, capable of accepting line-level and speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.\u003c\/p\u003e\n\u003cp\u003eThe JD500\/1 is also equipped with an onboard LED-clipping indicator ring, surrounding the input sensitivity control. This useful feature lets you set your amplifier’s input sensitivity, quickly and accurately, without special equipment. With the addition of an RBC-1 remote level control (sold separately), you can control the subwoofer level from the driver’s seat.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791943499866,"sku":"91016","price":249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-amplifier-jl-audio-jd500-1-jd-series-monoblock-amp-class-d-subwoofer-amplifier-500w-rms-47166416683274.jpg?v=1786095035"},{"product_id":"jl-audio-jd1000-1-jd-series-monoblock-amp-class-d-subwoofer-amplifier-1000w-rms","title":"JL Audio JD1000\/1 JD Series Monoblock Amp Class D Subwoofer Amplifier 1000w RMS","description":"\u003cp\u003e\u003cstrong\u003eJD1000\/1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eMonoblock Class D Subwoofer Amplifier, 1000 W x 1 @ 2 Ω \/ 600 W x 1 @ 4 Ω - 14.4V\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMonoblock Class D Subwoofer Amplifier, 1000 W x 1 @ 2 Ω \/ 600 W x 1 @ 4 Ω - 14.4V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned to produce a serious 1000 watts into 2 ohms (14.4V, 1% THD), the JD1000\/1 amplifier is a great solution for powering subwoofers in a cost-conscious system. Our proprietary NexD™ switching technology delivers large amounts of real-world power output with excellent efficiency and ultra-low distortion.\u003c\/p\u003e\n\u003cp\u003eThe JD1000\/1’s controls are located on the input panel. while the power and speaker connections can be found along the opposite end of its extruded aluminum chassis. Signal processing features include a 12 dB \/ octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balanced inputs are also on-hand, capable of accepting line-level and speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.\u003c\/p\u003e\n\u003cp\u003eThe JD1000\/1 is also equipped with an onboard LED-clipping indicator ring, surrounding the input sensitivity control. This useful feature lets you set your amplifier’s input sensitivity, quickly and accurately, without special equipment. With the addition of an RBC-1 remote level control (sold separately), you can control the subwoofer level from the driver’s seat.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791943598170,"sku":"91013","price":379.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-amplifier-jl-audio-jd1000-1-jd-series-monoblock-amp-class-d-subwoofer-amplifier-1000w-rms-47166418256138.jpg?v=1786095015"},{"product_id":"jl-audio-jd400-4-jd-series-4-channel-amp-full-range-class-d-amplifier-400w-rms","title":"JL Audio JD400\/4 JD Series 4 Channel Amp Full Range Class D Amplifier 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eJD400\/4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e4 Ch. Class D Full-Range Amplifier, 100 W x 4 @ 2 Ω \/ 75 W x 4 @ 4 Ω - 14.4V\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4-Channel Class D Full-Range Amplifier, 100 W x 4 @ 2 Ω \/ 75 W x 4 @ 4 Ω - 14.4V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUtilizing our exclusive NexD™ high-speed switching technologies, the JD400\/4 amplifier is engineered to deliver loads of clean power, with excellent efficiency and low distortion. This little guy churns out 100 watts of audio from each of its four channels into 2 ohms (14.4V, 1% THD) and is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a whopping 200W x 2 into 4 ohms.\u003c\/p\u003e\n\u003cp\u003eThe JD400\/4’s controls can be found on the input panel of the amplifier, with all speaker and power connections located along the opposite end of the extruded aluminum chassis. Signal processing features include high or low-pass 12 dB \/ octave filters (defeatable) for each channel pair, with continuously variable frequency selection from 50-500 Hz, and dual-range, differential-balanced inputs capable of accepting line-level or speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard equipment.\u003c\/p\u003e\n\u003cp\u003eOnboard LED-clipping indicators are also included surrounding each input sensitivity control. This convenient feature lets you set your amplifier’s input sensitivity, quickly and accurately, without special equipment. You will also find a set of buffered, pass-through preamp outputs on-board, so you can pass signals to another amplifier.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791943696474,"sku":"91015","price":279.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-amplifier-jl-audio-jd400-4-jd-series-4-channel-amp-full-range-class-d-amplifier-400w-rms-47166419435786.jpg?v=1786094997"},{"product_id":"jl-audio-ho110-w6v3-subwoofer-10-inch-w6-ho-wedge-ported-sub-enclosure-600w-rms","title":"JL Audio HO110-W6V3 Subwoofer 10 Inch W6 HO Wedge Ported Sub Enclosure 600w RMS","description":"\u003cp\u003e\u003cstrong\u003eHO110-W6v3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 10W6v3 H.O. Wedge, Ported, 2 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosed Subwoofer System with Single 10W6v3-D4 Subwoofer, Dark Gray \/ Black Carpet (600 W, 2 Ω) - Ported Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output. In the HO110-W6v3, the high power handling of the 10W6v3 Subwoofer, combined with its small enclosure requirements, results in a very compact subwoofer system that is capable of impressive output with moderate amplification.\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented, chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates just above the woofer, coupling the port output to the woofer's direct output. This also provides the necessary surface area and port length to maximize the performance of the W6v3 driver. This enclosure design has been carefully engineered to the optimum ported alignment for the 10W6v3, and has been fine-tuned through extensive real-world listening.\u003c\/p\u003e\n\u003cp\u003eThis subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. While no grille is provided, the recessed mounting baffle provides some protection for the woofer. A steel mesh woofer grille insert can be purchased separately (Model: SGR-10W6v2\/v3), if additional woofer protection is desired.\u003c\/p\u003e\n\u003cp\u003eFinish: Dark gray, high-grade automotive carpet, with black carpet on woofer baffle. \"JL AUDIO\" is embroidered in silver on the side surface of the enclosure.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eRecommended amplifier power: 200 - 600W\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 2 Ω\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791944089690,"sku":"91008","price":919.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-subwoofer-jl-audio-ho110-w6v3-subwoofer-10-inch-w6-ho-wedge-ported-sub-enclosure-600w-rms-47166431527178.jpg?v=1786094917"},{"product_id":"jl-audio-acp208lg-w3v3-dual-8-active-subwoofer-microsub-amplifier-500w-rms","title":"JL Audio ACP208LG-W3V3 Dual 8” Active Subwoofer MicroSub+ Amplifier 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eACP208LG-W3v3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eDual 8W3v3 MicroSub+™ with DCD™ Amplifier, Ported, 0.20 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAmplified Subwoofer System with Dual 8W3v3-0.40 Subwoofers, Built-In 500W Class D Amplifier, Black Carpet - Ported Enclosure\u2028\u2028\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith MicroSub+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes our exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance W3v3 drivers. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.\u003c\/p\u003e\n\u003cp\u003eKey to the enclosure’s performance is its efficient slot-ported design and precise tuning of its dual 8Wv3 Subwoofers, each in its separate airspace. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port for each driver wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The two flared port entries\/exits, one on each end of the enclosure, further enhance sound quality by minimizing air-flow noises through each port.\u003c\/p\u003e\n\u003cp\u003eIntegration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSub™ systems, these amplified versions produce the kind of output and extension normally associated with much larger systems.\u003c\/p\u003e\n\u003cp\u003eNote: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage.\u003c\/p\u003e\n\u003cp\u003eFinish: Black, high-grade automotive carpet with silver \"JL AUDIO\" embroidery on front baffle. Steel mesh grilles are included to protect the Subwoofers.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eAmplifier power: Built-in DCD™ Class D amplifier (500 W @ 0.20 Ω)\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 0.20 Ω\u003c\/p\u003e\n\u003cp\u003eEnclosure and Subwoofers Built in USA with global components.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791944155226,"sku":"90949","price":949.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-subwoofer-jl-audio-acp208lg-w3v3-dual-8-active-subwoofer-microsub-amplifier-500w-rms-47166433984778.jpg?v=1786094907"},{"product_id":"jl-audio-acp108lg-w3v3-8-active-subwoofer-microsub-dcd-amplifier-250w-rms","title":"JL Audio ACP108LG-W3V3 8” Active Subwoofer MicroSub+ DCD Amplifier 250w RMS","description":"\u003cp\u003e\u003cstrong\u003eACP108LG-W3v3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 8W3v3 MicroSub+™ with DCD™ Amplifier, Ported, 0.40 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAmplified Subwoofer System with Single 8W3v3-0.40 Subwoofer, Built-In 250W Class D Amplifier, Black Carpet - Ported Enclosure\u2028\u2028\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith MicroSub+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes our exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance W3v3 driver. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.\u003c\/p\u003e\n\u003cp\u003eKey to the enclosure’s performance is its efficient slot-ported design and precise tuning of its 8Wv3 Subwoofer. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port.\u003c\/p\u003e\n\u003cp\u003eIntegration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSub™ systems, these amplified versions produce the kind of output and extension normally associated with much larger systems.\u003c\/p\u003e\n\u003cp\u003eNote: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage.\u003c\/p\u003e\n\u003cp\u003eFinish: Black, high-grade automotive carpet with silver \"JL AUDIO\" embroidery on front baffle. A steel mesh grille is included to protect the Subwoofer.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eAmplifier power: Built-in DCD™ Class D amplifier (250 W @ 0.40 Ω)\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 0.40 Ω\u003c\/p\u003e\n\u003cp\u003eEnclosure and Subwoofer Built in USA with global components.\u2028\u2028\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791944253530,"sku":"90946","price":559.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-subwoofer-jl-audio-acp108lg-w3v3-8-active-subwoofer-microsub-dcd-amplifier-250w-rms-47166437622026.jpg?v=1786094898"},{"product_id":"jl-audio-acp110lg-tw1-10-active-subwoofer-microsub-dcd-amplifier-400w-rms","title":"JL Audio ACP110LG-TW1 10” Active Subwoofer MicroSub+ DCD Amplifier 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eACP110LG-TW1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 10TW1 MicroSub+™ with DCD™ Amplifier, Ported, 0.25 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAmplified Subwoofer System with Single 10TW1-0.25 Subwoofer, Built-In 400W Class D Amplifier, Black Carpet - Ported Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith MicroSub+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes our exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.\u003c\/p\u003e\n\u003cp\u003eKey to the enclosure’s performance is its efficient slot-ported design and precise tuning of its 10TW1 Subwoofer. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port.\u003c\/p\u003e\n\u003cp\u003eIntegration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSub™ systems, these amplified versions produce the kind of output and extension normally associated with much larger systems.\u003c\/p\u003e\n\u003cp\u003eNote: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage.\u003c\/p\u003e\n\u003cp\u003eFinish: Black, high-grade automotive carpet with silver \"JL AUDIO\" embroidery on front baffle. A steel mesh grille is included to protect the Subwoofer.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eAmplifier power: Built-in DCD™ Class D amplifier (400 W @ 0.25 Ω)\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 0.25 Ω\u003c\/p\u003e\n\u003cp\u003eEnclosure and Subwoofer Built in USA with global components\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791944319066,"sku":"90947","price":699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-subwoofer-jl-audio-acp110lg-tw1-10-active-subwoofer-microsub-dcd-amplifier-400w-rms-47166440866058.jpg?v=1786094888"},{"product_id":"jl-audio-acp112lg-tw1-12-active-subwoofer-microsub-dcd-amplifier-400w-rms","title":"JL Audio ACP112LG-TW1 12” Active Subwoofer MicroSub+ DCD Amplifier 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eACP112LG-TW1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 12TW1 MicroSub+™ with DCD™ Amplifier, Ported, 0.25 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAmplified Subwoofer System with Single 12TW1-0.25 Subwoofer, Built-In 400W Class D Amplifier, Black Carpet - Ported Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith MicroSub+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes our exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.\u003c\/p\u003e\n\u003cp\u003eKey to the enclosure’s performance is its efficient slot-ported design and precise tuning of its 12TW1 Subwoofer. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port.\u003c\/p\u003e\n\u003cp\u003eIntegration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSub™ systems, these amplified versions produce the kind of output and extension normally associated with much larger systems.\u003c\/p\u003e\n\u003cp\u003eNote: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage.\u003c\/p\u003e\n\u003cp\u003eFinish: Black, high-grade automotive carpet with silver \"JL AUDIO\" embroidery on front baffle. A steel mesh grille is included to protect the Subwoofer.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eAmplifier power: Built-in DCD™ Class D amplifier (400 W @ 0.25 Ω)\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 0.25 Ω\u003c\/p\u003e\n\u003cp\u003eEnclosure and Subwoofer Built in USA with global components\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791944351834,"sku":"90948","price":759.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-subwoofer-jl-audio-acp112lg-tw1-12-active-subwoofer-microsub-dcd-amplifier-400w-rms-47166442045706.jpg?v=1786094878"},{"product_id":"jl-audio-acs110lg-tw1-10-active-subwoofer-powerwedge-dcd-amplifier-400w-rms","title":"JL Audio ACS110LG-TW1  10” Active Subwoofer PowerWedge+ DCD Amplifier 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eACS110LG-TW1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 10TW1 PowerWedge+™ with DCD™ Amplifier, Sealed, 0.25 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAmplified Subwoofer System with Single 10TW1-0.25 Subwoofer, Built-In 400W Class D Amplifier, Black Carpet - Sealed Enclosure\u2028\u2028\u2028\u2028\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn PowerWedge+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this subwoofer system employs our exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.\u003c\/p\u003e\n\u003cp\u003eHarnessing the performance and insanely small box requirements of the TW1 Subwoofer, this subwoofer system is designed to deliver amazing sub-bass from an enclosure that is only 5 inches (127 mm) deep. Its low-profile enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10TW1 driver and has been fine-tuned through extensive real-world listening.\u003c\/p\u003e\n\u003cp\u003eIntegration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space.\u003c\/p\u003e\n\u003cp\u003eNote: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage.\u003c\/p\u003e\n\u003cp\u003eFinish: Black, high-grade automotive carpet with silver \"JL AUDIO\" embroidery on front baffle. A steel mesh grille is included to protect the Subwoofer.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eAmplifier power: Built-in DCD™ Class D amplifier (400 W @ 0.25 Ω)\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 0.25 Ω\u003c\/p\u003e\n\u003cp\u003eEnclosure and Subwoofer Built in USA with global components\u2028\u2028\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791944417370,"sku":"90950","price":649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-subwoofer-jl-audio-acs110lg-tw1-10-active-subwoofer-powerwedge-dcd-amplifier-400w-rms-47166442963210.jpg?v=1786094871"},{"product_id":"jl-audio-acs112lg-tw1-12-active-subwoofer-powerwedge-dcd-amplifier-400w-rms","title":"JL Audio ACS112LG-TW1  12” Active Subwoofer PowerWedge+ DCD Amplifier 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eACS112LG-TW1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 12TW1 PowerWedge+™ with DCD™ Amplifier, Sealed, 0.25 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAmplified Subwoofer System with Single 12TW1-0.25 Subwoofer, Built-In 400W Class D Amplifier, Black Carpet - Sealed Enclosure\u2028\u2028\u2028\u2028\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn PowerWedge+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this subwoofer system employs our exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.\u003c\/p\u003e\n\u003cp\u003eHarnessing the performance and insanely small box requirements of the TW1 Subwoofer, this subwoofer system is designed to deliver amazing sub-bass from an enclosure that is only 6.625 in. (168 mm) deep. Its low-profile enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 12TW1 driver and has been fine-tuned through extensive real-world listening.\u003c\/p\u003e\n\u003cp\u003eIntegration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space.\u003c\/p\u003e\n\u003cp\u003eNote: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage.\u003c\/p\u003e\n\u003cp\u003eFinish: Black, high-grade automotive carpet with silver \"JL AUDIO\" embroidery on front baffle. A steel mesh grille is included to protect the Subwoofer.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eAmplifier power: Built-in DCD™ Class D amplifier (400 W @ 0.25 Ω)\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 0.25 Ω\u003c\/p\u003e\n\u003cp\u003eEnclosure and Subwoofer built in USA with global components\u2028\u2028\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":43791944450138,"sku":"90951","price":699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/files\/jl-audio-subwoofer-jl-audio-acs112lg-tw1-12-active-subwoofer-powerwedge-dcd-amplifier-400w-rms-47166444568842.jpg?v=1786094864"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/3169\/2890\/collections\/jl-audio-logo.png?v=1786081243","url":"https:\/\/caraudiorevolution.co.uk\/collections\/jl-audio.oembed","provider":"Dream Ice","version":"1.0","type":"link"}